Active SMART

S.M.A.R.T. attribute definitions

Temperature - Attribute information

Attribute Name:

Temperature

Attribute ID:

194

Description:

Hard disk drive temperature. The raw value of this attribute shows built-in heat sensor registrations (in degrees centigrade). You can use Active SMART to check the hard disk temperature and prevent its overheating.

Critical:

Hard drives that support this attribute:

Samsung, Seagate, IBM (Hitachi), Fujitsu (not all models), Maxtor, WD (Western Digital) (not all models)

What is the S.M.A.R.T. attribute?
The S.M.A.R.T. attributes are specific properties (parameters) of various parts of a disk. S.M.A.R.T. uses attributes to monitor the disk condition and to analyze its reliability (e.g.: the "Temperature" attribute indicates the temperature of the hard disk, the "Power-On Hours" attribute indicates the count of hours in a power-on state, etc.) Various manufacturers may use different sets of attributes.

Want to protect your hard drive from a sudden breakdown?

Modern hard disks support a self-monitoring technology called S.M.A.R.T (Self-Monitoring, Analysis and Reporting Technology). This technology allows you to monitor the important parts of hard drives, warning you if their condition is getting worse and data loss is possible. However, in order to use this information, you will need special software which can collect and process it. Active SMART is intended for just this purpose.
Install Active SMART to protect your HDDs and the data stored on them.

 Click here to learn more about Active SMART

Related articles

 What is S.M.A.R.T. technology for hard drives
 What do I do if a S.M.A.R.T. failure happens?
 How to protect your hard disk from overheating?
 What is the hard disk monitor and how it works?

S.M.A.R.T. attributes listed in the Active SMART attribute definitions list

Raw Read Error Rate
Througput Performance
Spin Up Time
Start/Stop Count
Reallocated Sector Count
Read Channel Margin
Seek Error Rate
Seek Time Performance
Power On Hours Count
Spin Retry Count
Recalibration Retries
Device Power Cycle Count
Soft Read Error Rate
G-Sense Error Rate
Power-Off Retract Cycle
Load/Unload Cycle Count
Temperature
Reallocation Events Count
Current Pending Sector Count
Uncorrectable Sector Count
UltraDMA CRC Error Rate
Write Error Rate
Disk Shift
Loaded Hours
Load/Unload Retry Count
Load Friction
Load-in Time
Torque Amplification Count
GMR Head Amplitude

Check S.M.A.R.T. attributes

Get all information about SMART attributes with ActiveSMART - hard drive diagnostic and failure prediction software with S.M.A.R.T. technology support.
 Click here to learn more about ActiveSMART

Newsletter

Subscribe to the Active SMART newsletter and receive news about product updates and new releases.