ActiveSMART Installation
To install Active SMART run the installation file
activesmartNNN.exe (where NNN is a version number). The
installation program will guide you through the simple installation
process.
In some cases Active SMART requires certain system drivers to be
installed to function correctly:
When Active SMART SCSI version is to
be used to monitor SCSI drives or RAID arrays:
The WINASPI driver must be loaded and started on both Windows 95/98
and Windows NT machines. The ASPI driver handles communications
between the SCSI controller and the system. The driver is NOT
normally required for Hard Disk Drives to function if no other SCSI
devices are present. If the WINASPI Driver is not installed Active
SMART will not be able to monitor the S.M.A.R.T. Alerts issued by
the drive, nor will drive information be displayed. All other
functions of Active SMART are not affected. You can download ASPI
driver from the Adaptec website using
this link
You can uninstall Active SMART using Control
Panel or "Uninstall" link in the Active SMART program group in the
Start menu.
|
